Overview

2-shell internal extractor with spread 14 mm – 19 mm, 27 mm depth of use.

The internal extractors of series 21 are used for extracting internal bearings, bearing outer rings, and sockets in trade, workshops, and industry. The multi-shelled design of the internal extractors with their extra-large gripping edges allows for the secure extraction of internal parts. Series 21 impresses with its compatibility and application variety. Depending on the application, there are numerous variants of the optionally 2-jaw or 3-jaw internal extractors. They are used either together with counter stays or with sliding hammers.

Application

• For extracting internal bearings, bearing outer rings and bushes.

Specifications

• Inner pull-out span (min. – max.) (mm/inch): 14 – 19mm / 9/16 – 3/4″

• Insertion depth of internal puller (mm/inch): 27mm / 1 1/16″

• Diameter of the puller (mm/inch): 30mm / 1 3/16″

• Mounting thread (nominal dimension): M7

• Width across flats hexagon socket (mm/inch): 13mm / 1/2″

• Gross Weight (kg/lb): 0,12 kg / 0,265