Fluke 832 Laser Shaft Alignment Tool

Fluke 832 Laser Shaft Alignment Tool

$ 149.4 USD $ 498 USD

OverviewThe Capabilities that Set Fluke 832 ApartFaster setup, fewer stepsFaster setup, fewer steps Fluke 832 uses a single-laser, dual-detector system that makes shaft alignment quicker on standard rotating machines.Skip the pre-alignment and go straight to measurementMount one laser and one…

  • Categories :Hardware tools
  • Product Code:Y18893847
  • Stock : In Stock

Overview

The Capabilities that Set Fluke 832 Apart

Faster setup, fewer steps

Faster setup, fewer steps Fluke 832 uses a single-laser, dual-detector system that makes shaft alignment quicker on standard rotating machines.

  • Skip the pre-alignment and go straight to measurement

  • Mount one laser and one sensor to start aligning

  • Get precise results in fewer moves and less time

Real-time guidance you can trust

Live feedback helps you adjust the machine confidently during every shaft alignment, finishing each job faster and more accurately.

  • Monitor corrections simultaneously on both vertical and horizontal planes

  • Receive automatic out-of-range notifications

  • Verify results instantly with Quality Factor and Standard Deviation

Versatile measurement options

Whether rotation is full or limited, Fluke 832 adapts to the job without compromising accuracy.

  • Use static machine or multiple foot positions, depending on setup

  • Measure reliably even with uncoupled shafts

Built-in workflows for tricky alignments

Address common field complications without switching systems or losing time.

  • Identify and correct Soft Foot before starting alignment

  • Reliable operation even on complex base conditions

Smarter reports, clearer ROI

Track, document, and share alignment results that the whole team can use.

  • Generate clear, customized alignment reports

  • Automatically log asset-specific IDs and measurements

  • Unlock the Built-in ROI calculator feature to see long-term savings

  • Email results quickly via built-in templates

Features

  • Single-laser, dual-detector precision

  • Simple, easy setup

  • Simultaneous Live Move (horizontal & vertical)

  • Soft Foot correction

  • 8-Point Active Clock

  • Automatic out-of-range notifications

Contents

  • Fluke 832 Shaft Alignment Tablet

  • Fluke 832 Sensor

  • Fluke 832 Laser

  • Charger

  • Three Cables

  • USB Stick

  • Carrying Case

  • Manuals

  • Two Calibration Certificates

Specifications

Fluke Shaft Alignment Tablet

General specifications
CPU Processor: Octa-Core (8): 2.2 GHz (2) and 1.8 GHz (6)
Memory: 4 GB LPDDR4X SDRAM/64 GB UFS Flash
Display Technology: Corning Gorilla Glass
Resolution: 600 nits, color WXGA 1280×800
Dimensions: 8 inch/20.3 cm
Power supply Operating time: Up to 11 Hours
Battery: 6100 mAh 3.87 V rechargeable Li-Ion Polymer; (23.61 Wh)
Charging: USB-C
Connectivity Wifi: IEEE 802.11 a/b/g/n/ac/d/h/i/r/k/v/w/mc/ax 2×2 MU-MIMO; Wi-Fi certified; IPv4, IPv6 (Wi-Fi 6)
Bluetooth: Bluetooth v5.1 / 2.1+EDR Class 2 (Bluetooth LE)
RFID: Integrated RFID with read and write capabilities Docking connector (charge and data)
USB-C side port (tablet charging and data only)
Environmental protection IP 65: Dustproof and water jets resistant
Relative humidity: 5% to 95% non-condensing
Drop test 1.2 m (4 ft)
Temperature range Operation: -20C to 50C (-4F to 122F)
Storage: -40C to 70C (-40F to 158F)
Dimensions 267 mm L x 171 mm H x 35 mm D 10 33/64″ x 6 47/64″ x 1 3/8″
Weight 930 g/2.1 lbs
Camera Rear: Image capture: 13 MP auto-focus camera with user controllable LED flash
Front: 5MP
CE conformity Refer to the CE compliance certificate
Carrying case Dimensions 595 x 355 x 115 mm (23 1/2″ x 14″ x 4 1/2″)

Fluke 832 Sensor

General specifications
Type 6-axis 2 planes (4 displacement axes and 2 angles)
Measurement Optical range 14 x 14 mm (0.55 x 0.55 in.)
Area Unlimited, dynamically extendible
Resolution 1 m (0.04 mil); Angular 10 Rad
Error < 2%
Transmitted rate Approx. 20 Hz
Inclinometer Resolution 0.1
Error Roll +-1; Pitch +- 3
LED indicators 1 LED for laser adjustment, battery and charge status; 1 LED for BT communication
Power supply Battery Lithium-Ion rechargeable battery 3.7 V, 4.7 Wh
Operating time 30 hours (continuous use)
Charging time 2.5 h for up to 80%; 4 h for up to 100%
Charging USB-C
External interface Integrated low power 2.4 GHz Radio (BT LE); USB 2.0 Full Speed
Radio transmission distance Up to 50 m (160 ft) direct line of sight
Environmental protection IP 65 Dustproof and water jets resistant, shockproof
Relative humidity 10% to 90%
Ambient light protection Optical and active electronic digital compensation
Temperature range Operation -10C to 50C (14F to 122F)
Charging 0C to 35C (32F to 95F)
Storage -20C to 50C (-4F to 122F)
Dimensions Approx. 104 x 72 x 54 mm (4 1/8″ x 2 13/16″ x 2 1/8″)
Weight Approx. 231 g (8.2 oz)
CE conformity Refer to the CE compliance certificate

Fluke 832 Laser

General specifications
Type Semiconductor laser diode
Laser Power < 1 mW
Divergence 0.3 mrad
Wavelength 630-640 nm (red, visible)
Separation distance Up to 10 m
Adjustment No
Safety class Class 2 according to IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019. Safety precaution: Do not look into laser beam
Inclinometer Resolution 0.1
Error Roll +-1
LED indicators 1 LED for battery and charge status
Power supply Battery Lithium-Ion rechargeable battery 3.7 V, 4.7 Wh
Operating time 40 hours (continuous use)
Charging time 2.5 h for up to 80%; 4 h for up to 100%
Charging USB-C
Environmental protection IP 65 Dustproof and water jets resistant, shockproof
Relative humidity 10% to 90%
Temperature range Operation -10C to 50C (14F to 122F)
Charging 0C to 35C (32F to 95F)
Storage -20C to 50C (-4F to 122F)
Dimensions Approx. 101 x 75 x 37 mm (4 x 2 15/16 x 1 7/16)
Weight Approx. 190 g (6.7 oz)
CE conformity Refer to the CE compliance certificate

There are no reviews yet.